If you have logged into your AdTrap and went through the Welcome wizard, it made you change your password. The username is still admin.

Default Username is admin
Default password is password
(Both are case-sensitive)

If you still can not login to your AdTrap, you must reset the Adtrap by following the procedure below.

AdTrap Reset Procedure
1. Unplug all cables, including power.
2. Plug in the power cable only
3. On the front of your AdTrap, look for the power light and the number 1 light to turn on and wait 5 seconds, (This usually takes between 15-20 seconds to see the number 1 light.)
4. Unplug the power and plug the power back in
5. Repeat step 3 & 4 until you see all 4 lights are flashing
6. AdTrap is now reset to the default software settings